B-Train

STANDARD SPECIFICATIONS:  B-TRAIN LEAD UNIT

38' TRIAXLE - (28'6" Hopper Body Assembly – 38' Overall length)

 

KINGPIN SETTING: 24"

WALL PANELS

  • Pre-painted white .048" and .063" aluminum, corrugated on 4" centers. 

ACCESS

  • Aluminum ladders, handholds, and platforms front and rear

FRONT CORNERS

  • 6" radius, mill finish aluminum (color optional).

LIGHTS & WIRING

  • CMVSS-108 w/weather-pack automotive style connections w/L.E.D. lights

SUPPORT LEGS

  • 50,000 lb. lift capacity with roadside removable crank, low profile shoe.

HOPPERS

  • Two piece .125 aluminum formed tubs with 35.8 degree side slope angle and 33 degree end slope angle. 
  • Single tub design. 
  • Both doors open from the center out. 
  • End slope panels-.080" aluminum supported by aluminum channel with Za shaped member, 33 degree slope angle. Divider Panel - .080 aluminum.

TRAPS

  • 30"W x 22"L Hopper clearance 25".

SUSPENSION & AXLES

  • 23,000 lb. rated air ride suspension 5” diameter axle with 49" axle spacing lead.

BRAKES

  • 16-1/2" X 7" complying with CMVSS 121, Meritor/Wabco 4 sensor, 2 modulators (which exceed the minimum requirements of CMVSS 121, S5.5.)

WHEELS

  • Twelve (12) 24.5 x 8.25 white steel disc painted, hub piloted.

TIRES

  • Twelve (12) 11R24.5 Bridgestone R195F radials.

TARP

  • 18 oz. roll tarp with rear mounted crank.

TARP BOWS

  • Five (5) - 9" rise galvanized steel arch type.

PAINT

  • Black protective metal coating on all steel parts.

REAR FRAME

  • Stainless steel and aluminum construction. 
  • 15 degree forward slant.

FIFTH WHEEL

  • Holland FW7040 Kompensator with Progressive grease manifold.

STANDARD SPECIFICATIONS: B-TRAIN PUP UNIT

28'6" TANDEM AXLE - (28'6" Overall Length)


KINGPIN SETTING:
20"

WALL PANELS

  • Pre-painted white .048" and .063" aluminum, corrugated on 4" centers.

ACCESS

  • Aluminum ladders, handholds, and platforms front and rear.

FRONT CORNERS

  • 3" x 4" rectangular tube, mill finish aluminum

NOSE ASSEMBLY

  • Extruded mill finish aluminum construction. 
  • 15 degree rearward slant.

LIGHTS & WIRING

  • CMVSS-108 w/weather-pack automotive style connections w/L.E.D. lights

SUPPORT LEGS

  • 50,000 lbs. lift capacity with roadside removable crank, low-profile shoe.

HOPPERS

  • Two piece .125" aluminum formed tubs with 35.8 degree side slopes and 33 degree end slopes. 
  • Single tub design. 
  • Both hopper doors open from the center out. 
  • End slope panels-.080" aluminum supported by aluminum channel with Z shaped member. 
  • Divider Panel - .080 aluminum.

TRAPS

  • 30"W x 22"L Hopper clearance 25".

SUSPENSION & AXLES

  • 23,000 lb. rated air ride suspension 5" diameter axle with 10'1" total axle spread. 
  • Center axle is equal distance from front and rear axles.

BRAKES

  • 16-1/2" X 7" complying with CMVSS 121. 
  • Meritor/Wabco 4 sensor, 2 modulator which exceeds the minimum requirements of CMVSS 121, S5.5.

WHEELS

  • Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.

TIRES

  • Eight (8) 11R24.5 Bridgestone R195F radials.

TARP

  • 18 oz. black roll tarp with front mounted crank.

TARP BOWS

  • Five (5) - 9" rise galvanized steel arch type.

PAINT

  • Black protective metal coating on all steel parts.

Contact your nearest Canadian Authorized Timpte Dealer or:
Timpte Industries
1827 Industrial Drive
David City, Nebraska, 68632 U.S.A.
(402) 367-3056
sales@timpte.com

*NOTE: All Dimensions are + or – ¼”. All Specification subject to change Timpte reserves the right to change design specifications without notice contained herein is general in nature and is not intended for specific applications.
WARRANTY: See Timpte Warranty Card