>> >> >> >> Farm Hopper 28’6”, 33’5” & 38'

Farm Hopper 28’6”, 33’5” & 38'

STANDARD SPECIFICATIONS - 28’6”, 33’5”, 36', 38' HOPPER

 

APPLICATION 

  • Recommended for transportation of agricultural and industrial bulk commodities.

KINGPIN SETTING

  • 20”- Single I-beam with 3/8" steel flanges, 1/4” steel full-width pickup plate.

SIDE PANELS 

  • Pre-painted white .048” and .063” aluminum, corrugated on 4” centers. 
  • Lower Rails-Aluminum 7-11/16” high extrusion. 
  • Side Posts- Aluminum extrusion 1-3/4” z-posts on 12” centers. 
  • Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. 
  • Interior Lining-.048” aluminum.

REAR PANELS 

  • Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts.

ACCESS SYSTEM 

  • Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder 

NOSE PANELS 

  • Smooth pre-painted white .063” aluminum.

FRONT CORNERS 

  • 6” radius, mill finish aluminum (color optional).

LIGHTS & WIRING 

  • Side Lamps - Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D., (1) amber L.E.D. mid turn/marker lamp. 
  • Nose Lamps - (2) High mounted amber L.E.D. lamps. 
  • Standard High mounted Rear Frame Lamps - (5) red L.E.D. marker lamps on rear header. 
  • Rear Tail Lamps- (6)-4” diameter, 7 diode L.E.D. lamps, grommet mounted. 
  • Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. 
  • Common ground. 
  • Conspicuity Tape: Red and white reflective tape mounted in line with bottom row of side marker lamps and full width across rear of trailer. 
  • White reflective tape mounted on top corners of rear frame. (All lamps and wiring comply with FMVSS 108)

SUPPORT LEGS 

  • Square legs, with roadside removable crank, low-profile 10" diameter cushion foot shoe, 50,000 lbs. lift capacity - "No Lube" feature. Located 88 5/8” from Kingpin on 28’6” & 94” on 33’5” & 38'.

HOPPERS 

  • Two piece .125” aluminum formed panels with 35.8 degree side slopes and 33 degree center and end panel angles, high ground clearance design. 
  • Front and Rear end slope panels - .080" aluminum supported by aluminum channel with Z shaped crossmember, 33 degree slope angle. Divider Panel - .080" aluminum supported by aluminum channel bulkheads. 

TRAPS  

  • 24"W x 22"L openings supported by robust structural trap frame on 28'6" & 33'5" trailers.  24"W x 27"L on 38' trailers.  
  • The trap plates are 1/4 aluminum with steel stiffeners supported by double sealed steel ball bearings with a plastic internal seal.  
  • 102"wide trailers add 6" to trap opening width. 
  • Hopper clearance 25".

TRAP OPERATORS 

  • Each trap is opened and closed by a manually operated 1" diameter shaft connected through a U-joint to the double rack and pinion gears using a removable crank. 
  • There are trap locks at each crankshaft. The double rack and pinion gears drive at both sides of each trap plate.

SUSPENSION 

  • 23,000 lb. rated air suspension, 17" ride height, 71-1/2" or 77-1/2" track, 28-spline camshafts and "Q+" linings.  
  • Axles have Cam-Master "Q-style" quick-change brakes with 5.5" auto slacks and 30/30 spring brake chambers.  
  • Suspension subframe long beams are 4" x 8" x 3/16" rectangular structural steel tubing.  
  • Crosstubes are 6" x8" structural tubing.

HUB & DRUM 

  • Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted. 

BRAKES 

  • 16-1/2” X 7” complying with FMVSS 121. 4 sensor, 2 modulator with constant power supplied by center auxiliary pin. 
  • Exceeds the minimum requirements of FMVSS 121,S5.5

WHEELS 

  • Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.

TIRES 

  • Eight (8) 11R24.5 radials.

MUDFLAPS 

  • ½” Black heavy-duty rubber mudflaps, 24”W x 30”L.

TARP 

  • 18 oz. black roll tarp with rear mounted crank. 
  • Three molded black plastic sidewall protectors.

TARP BOWS 

  • Six (6) - 9” rise galvanized steel arch type on 28'6" &33'5" trailers, seven(7) on 38'.

COATINGS 

  • Black protective metal coating on all steel parts.

Timpte Highlights

Super_Tender_Belt.jpg

Super Tender

Read More

What's new Easy Flow

What's New!

Read More

Tri-Axle

“Multiple Axles” Trailers

Read More