Canadian B Train Specs
Tires
11R24.5 Bridgestone R197 radials.
Wheels
24.5 x 8.25 white steel disc painted, hub piloted.
Mudflaps
½” Black heavy-duty rubber 24”W x 30”L.
Oil Seals
Wheel Seals with Hubcaps.
Brakes
16-1/2” X 7’” complying with CMVSS 121.
Anti-Lock System
Meritor /WABCO 4 sensor. 2 modulator with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of CMVSS 121, S5.5.
Suspension
28’6”, 30’, 38’ – Air Ride Suspension, with 23,000 lb. rating. Cast suspension beams. 45’ – Air Ride Suspension.
Upper Coupler
Single I-beam with 3/8” steel flanges, 1/4” steel pickup and coupler. Kingpin Height 51” on 38’, 30’ 28’6”. 49” on 45’
Support Legs
50,000 lb. lift capacity with roadside removable crank, low profile shoe. 89-1/4” on 28’6”/38’, 84-1/4” on 30’, 94” on 45’
Kingpin Setting
38’/30’ – 24”, 28’6”/45’ – 20”
Front Corners
30’, 38’, 45’ – 6” radius, mill finish aluminum. 28’6” – 3” x 4-1/2” rectangular tube, mill finish aluminum, 15 degree rearward slant
Side Panels
Pre-painted white .048” and .063” in coupler area aluminum corrugated on 4” centers
Metal Coating
Black protective metal coating on all steel parts
Tarp
Standard Roll Tarp; 18 oz. all heat welded seams
Tarp Bows
9” rise galvanized steel arch type
Rear Frame
28’6”, 30’, 45’ – Corrugated pre-painted white aluminum panels and extruded posts. 38’ – Corrugated pre-painted white. .048 aluminum and 3” x 4-1/2” rectangular tube, mill finish aluminum 15 degrees frontward.
Hoppers
Two piece .125” aluminum formed tubs with 35.8 degree side slopes and 33 degree end slopes. Single tub design. Both hoppers doors open from the center out. End slope panels .080” aluminum supported by aluminum channel with Z shaped member. Divider Panel .080” aluminum. Note: 30’ rear end slope at 28 degrees. 45’ – hopper doors open to the inside
Traps
28’6”, 30’, 38’ – 30”W x 22”L, Hopper Clearance 27”
45’ – 30”W x 37”L, Hopper Clearance 25”
Electircal System
Complies with CMVSS-108 with all weather-pack automotive style connections with L.E.D. lights
Side & Nose Markers, Clearance & ID Lamps
Side Lamps – Includes 2 rows of 3 lamps each; (3) amber L.E.D., (2) red L.E.D., (1) amber L.E.D. mid turn / marker lamp.
Nose Lamps – (2) high mounted amber L.E.D. lamps.
Standard High Mounted Rear Frame Lamps – (5) red L.E.D. marker lamps on rear header
Rear Tail Lamps
28’6”, 30’, 45’ – (6)-4” diameter, 7 diode L.E.D. lamps, grommet mounted. (2) red turn signals and (4) red stop/tail and stop/clearance combination. 38’ – has (4)-4” diameter, 7 diode L.E.D. lamps, grommet mounted
Step, Ladder, & Handhold
Aluminum ladders, handholds, and platforms are mounted on both the front and the rear
Fifth Wheel 38' Only
FW35-7723XL24 Kompensator with progressive grease manifold