- Lengths 39’
- Widths 96”
- Sidewall Heights 66”
Timpte trailers are built to handle the harshest environments. Each comes standard with the following features to make them stronger and last longer. Learn more about our standard features, then start building your own for the custom features you want, and your work demands.
.063” aluminum panels are used in high stress areas for added strength and durability.
4’ exterior side panels are a long time Timpte trademark that offers unmatched strength and ease of repair.
Air Ride Dump Valve & Oil Filled Pressure Gauge
Located on the nose of the trailer where it is immediately accessible to the operator on all air ride trailers (does not apply to tri-axle trailers with lift axle(s)).
Enclosed Upper Coupler Assembly
The upper coupler assembly is a beam truss designed for the rigors of use with extra crossmembers, “x” brace and enclosure added for extra strength.
Operates using a single 12-volt hydraulic motor with the industries best swing clearance. Door opens past the rear trap frame cross-member by 1” for a fully open door. In the event of an emergency, doors can be easily converted into manual operation.
Placed on tubs to help loosen product when unloading allowing customer to knock on railing.
Lights & Electrical
All weather-pack automotive style connections sealed to prevent corrosion.
Standard light configuration:
- 2 rows of 3 LED bullet lights with center mid-ship turn signal
- (2) Front high-mount LED bullet lights
- (5) Rear high-mount marker LED bullet lights
- (6) 4” diameter stop/turn signal LED bullet lights
Electric Tarp System: Thunder7000
This dual arm tarping system includes One-Touch technology, 100% American made motor and multi-function remote.
Made of 18 oz. premium-grade woven PVC. Tarp construction is all heat-welded which adds strength and thickness to high stress areas.
Heavy duty extruded aluminum box design top rail eliminates having to use fixed structural tarp bows. Timpte tarp bows are easily replaced if damaged with 2 ridge straps.
When it comes to last mile transportation efficiencies, Timpte trailers are the right solution. We customize each one to make moving frac sand easier and more cost effective. Below are some of the most common options chosen for this industry, however, our team works closely with you to make sure your trailer is up for the task, no matter how harsh the environment.
Two piece formed tub
35.8-degree side slope
25” ground clearance
Removable from the tub, helps loosen product when unloading through vibration
Direct drive – opened and closed by a manually operated 1” diameter shaft connected through a u-joint to the double rack and pinion gears using removable crank.
Gear drive – High and low gear options manually operated using removable crank.
Hydraulic Top Hatch and Enclosed Cover
Constructed with .080” aluminum along with a hydraulically operated sliding hatch 34” wide by 10 ft. ling. Opening system is remote controlled and utilizes field proven hydraulic cylinders.
Rear Corner Post Lights
7 Across Rear
3 Light Cluster Lower Bumper
Interior Tub Lights
High performance LED lights will provide the highest level of light output during late night operations. Powered on with a switch or remote, these lights are impact and all-weather resistant for the toughest conditions.
Aluminum Upper Coupler
Beam truss assembly designed for the rigors of field use. Extra crossmembers and a “X” brace are added for extra strength for field application. Weight savings of 435 to 470 lbs.
Four (4) Aluminum Wheels on 22.5 Wide Base Tires
- Tandem Axle – Available with front lift axle, increased wall thickness of long beams by 25%.
- Tri Axle – available with front and rear lift axles, available for 48’ and 50’ tri-axles with both spread and closed spaced tandem.
Light Weight Hub & Drums
Weight savings of 92 lbs.
Available in 66”
Front Corner Mud Flaps
Feature to keep rocks off brakes.
Land Leg Mud Flaps
Helps keep road material out of trap bearings, especially in the winter.
Sight Glass Windows
4” x 8” sight glass windows provide increased visibility inside the hopper tubs during loading and unloading.
Roughneck Trailer Capacities
|||Heaped 9"||Water Level|
|Length & Height||96" Wide||102" Wide||96" Wide||102" Wide|
|39’ 0” Length, 66” Height||750 ft3||---||---||---||650 ft3||---||---||---|